节点文献

锂离子电池中纳米Cu-Sn合金负极材料的制备与性能研究

PREPARATION AND PROPERTY OF NANOMETER Cu-Sn ALLOY ANODE MATERIAL FOR LITHIUM-ION BATTERIES

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 任建国何向明姜长印万春荣

【Author】 REN Jianguo,HE Xiangming,JIANG Changyin,WAN Chunrong Materials Chemistry Laboratory, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 102201

【机构】 清华大学核能与新能源技术研究院材料化学实验室清华大学核能与新能源技术研究院材料化学实验室 北京 102201北京 102201

【摘要】 将反相微乳液工艺用于制备纳米储锂合金,成功地制备出了具有非晶结构的Cu-Sn合金纳米颗粒,避免了电极的粉化问题,改善了合金负极的循环性能.但纳米合金表面固体电解质膜(SEI膜)的成膜反应造成了较大的不可逆容量.纳米颗粒之间的接触电阻导致了电极导电性较差.实验证明,纳米Cu-Sn合金的颗粒尺寸与电极中导电剂含量的匹配问题对电极的电化学性能有较大的影响,当导电剂含量为40%时,粒径范围在50-60 nm的Cu-Sn合金具有最佳的电化学性能.

【Abstract】 Nanometer particles of Cu-Sn alloy, a kind of lithium storage material, with amorphous structures were successfully prepared by a reverse microemulsion technique. Because the electrode pulverization problem can be relieved by its small particle size, nanometer Cu-Sn alloy anode has a good cycle performance. However, a great irreversible capacity was caused by the formation of a SEI layer on the surface of nanometer alloy and the contact resistance between nanometer particles resulted in the poor electric conductivity. It is proved by experiments that the match of particle size and conductive agent content has a great impact on the electrochemical performance of the nanometer Cu-Sn alloy anode. When the conductive agent content increased to 40%, the nanometer Cu-Sn alloy with particle size of 50-60 nm presented the best performance.

【关键词】 锂离子电池Cu-Sn合金微乳液负极
【Key words】 lithium-ion batteryCu-Sn alloymicroemulsionanode
【基金】 清华大学基础研究基金资助项目985042021~~
  • 【文献出处】 金属学报 ,Acta Metallurgica Sinica , 编辑部邮箱 ,2006年07期
  • 【分类号】TM912
  • 【被引频次】23
  • 【下载频次】512
节点文献中: 

本文链接的文献网络图示:

本文的引文网络