【摘要】 利用机械动力学仿真分析软件ADAMS对甘蔗切割器刀片刀刃上的单点运动轨迹进行了仿真分析研究,根据甘蔗收割机样机切割器的实际尺寸建立了甘蔗切割器的虚拟模型,并在此基础上进行分析,得出了刀片刀刃上单点的空间运动轨迹及其主视图、俯视图、侧视图。更多还原

【Abstract】 ADAMS called Automatic Dynamic Analysis of Mechanical Systems was used in the simulation of moving locus of the single point which is on the sugarcane cutter’ s edge of knife. A parameterized virtual prototype model of sugarcane cutter was built and validated according to the factual size of the cutter on a sugarcane harvester specimen. Through analyzing, space moving locus of the single point which is on the sugarcane cutter’ s edge of knife and its elevation, planform, side view were gained.更多还原