节点文献

封闭型多异氰酸酯固化交联剂的合成

Synthesis of Blocked Polyisocyanate Cure-crosslinking Agent

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 皮丕辉许振苗文秀芳程江杨卓如

【Author】 PI Pi-hui,XU Zhen-miao,WEN Xiu-fang,CHENG Jiang,YANG Zhuo-ru(Research Institute of Chemical Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China)

【机构】 华南理工大学化学工程研究所华南理工大学化学工程研究所 广东广州510640广东广州510640

【摘要】 合成了一种低温解封的全封闭型多异氰酸酯固化交联剂,考察了合成反应速率和最终涂膜性能。实验发现:选择TD I-80和TMP制备预聚物,将TMP以连续滴加的方式加入TD I中,并控制在70℃反应2h,能得到理想的预聚物;以甲基异丁基甲酮为溶剂,采用乙二醇乙醚对预聚物进行封闭,在80℃封闭反应2~3h可得完全封闭型固化剂。最后将固化剂与二乙醇胺改性的环氧树脂E-20复配并进行电泳,得到的涂膜在150℃烘烤30m in,硬度可达3H~4H,综合性能优良。

【Abstract】 A kind of fully blocked polyisocyanate crosslinking agent with low deblocking temperature was synthesized and the reaction rate and film performance were studied.It was found by experiment that perfect pre-polymer can be obtained by using TDI and TMP as material,continuously adding TMP into TDI and controlling reaction at 70℃ for 2 hours,and the pre-polymer can be completely blocked by MIBK by using glycol ether as solvent and controlling reaction at 80℃ for 2~3 hours. Finally the cure-crosslinking agent was electrodeposited after mixed with epoxy of E-20 modified by diethanolamine.And the film was cured at 150℃ for 30 minutes with 3~4 H of hardness and good performance.

  • 【文献出处】 合成材料老化与应用 ,Synthetic Materials Aging and Application , 编辑部邮箱 ,2006年03期
  • 【分类号】TQ630.4
  • 【被引频次】9
  • 【下载频次】660
节点文献中: 

本文链接的文献网络图示:

本文的引文网络