节点文献

镀层厚度的X射线衍射法测量

Measurement of Plating Thickness by X-ray Diffraction Method

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李志海周上祺任勤石泉邱绍宇李聪

【Author】 LI Zhi-hai1,ZHOU Shang-qi1,REN-Qin1,SHI Quan1,QIU Shao-yu2,LI Cong2(1.College of Materials Science and Engineering,Chongqing University,400030,China;2.National Key Laboratory for Nuclear Fuel and Materials,Nuclear of Power Institute of China,Chengdu,610041,China)

【机构】 重庆大学材料科学与工程学院中国核动力研究设计院核燃料及材料国家级重点实验室中国核动力研究设计院核燃料及材料国家级重点实验室 400030400030成都610041

【摘要】 用基体X射线衍射法测量了化学镀Ni-P合金的镀层厚度,并进行了误差分析。结果表明,基体X射线衍射法是一种精确度较高的镀层厚度无损测量法,在其适用的范围之内,能客观准确地测量出镀层厚度,误差小于金相法测量误差;基体X射线衍射法的测量结果,几乎不受基体表面镀层结晶状态的影响,可以用来测量晶态或非晶态镀层厚度。

【Abstract】 Thickness of electroless Ni-P alloy plating has been measured by the substrate X-ray diffraction method and measurement error was analyzed.It shows that the method is one non-destructive method to measure the plating thickness with high precision,and its measurement error is less than that of metallographic method within its measurement range.This method can used to measure the crystal and noncrystal plating because it is hardly effected by the crystal state of plating.

【基金】 中国核动力研究设计院核燃料及材料国家级重点实验室资助(2004-08)
  • 【文献出处】 核动力工程 ,Nuclear Power Engineering , 编辑部邮箱 ,2006年03期
  • 【分类号】TG174.4
  • 【被引频次】16
  • 【下载频次】517
节点文献中: 

本文链接的文献网络图示:

本文的引文网络