节点文献

WSZ极紫外探测器及其信号采集电路的研究

The Research of WSZ Extreme Ultraviolet Detector and the Data Acquisition Circuits

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王光明赵宝升魏培永朱香平

【Author】 Wang Guangming,Zhao Baosheng,Wei Peiyong,Zhu Xiangping Xi′an Institute of Optics and Precision Mechanics of CAS,Xi′an 710068

【机构】 中国科学院西安光学精密机械研究所中国科学院西安光学精密机械研究所 西安710068西安710068

【摘要】 采用电荷分割方法设计了WSZ(Wedge-StripandZig)极紫外光探测器,其基于MCP的结构和单光子成像的特点使其在极弱光的探测方面具有独特的优势·设计了用于该探测器的快速三通道电荷放大电路和信号采集电路,以探测脉宽100~200ms、总电荷量1~20pC的电子脉冲·在真空条件下使用紫外光源对电路进行模拟试验,获得了峰值大小与阳极面板面积成比例的、噪音范围在10mV以内的三路脉冲信号·模拟实验结果证明,该探测器预计分辨率有望达到100μm×100μm·

【Abstract】 WSZ (Wedge-Strip and Zig) extreme ultraviolet (EUV) detector was designed by the charge division theory.Based on MCP and single photon imaging,the detector has original advantages on faint light detection.Three channels data acquisition circuits were designed to detect pulses with 100~200 ms widths and 1~20 pC total charges.The circuits were tested under vacuum condition and electron pulses proportionate to the acreages of the anodes with noises less than 10 mV are gathered and processed.It is reasoned to expect a resolution of 100×100 of this detector.

  • 【文献出处】 光子学报 ,Acta Photonica Sinica , 编辑部邮箱 ,2006年12期
  • 【分类号】TN23
  • 【被引频次】9
  • 【下载频次】185
节点文献中: 

本文链接的文献网络图示:

本文的引文网络