节点文献

丁酮对聚氨酯微孔膜性能的影响

EFFECTS OF MEK ON THE PROPERTIES OF PU MICROPOROUS FILM

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 吴磊权衡蔡璋喆李叶雨

【Author】 WU Lei~(1,2),QUAN Heng~2,CAI Zhang-zhe,LI Ye-yu~2(1.Donghua University,Shanghai,200051;2.Shanxi Xi′an Engeer Technology School 710048)

【机构】 东华大学西安工程科技学院西安工程科技学院 上海200051陕西西安710048

【摘要】 使用丁酮和二甲基甲酰胺配备混合溶剂,用于溶解稀释聚氨酯,并采用湿法成膜方法制备了聚氨酯微孔膜。通过调整溶剂的配比和凝固浴温度,研究了溶剂比例和凝固浴温度对成膜性能的影响。结果表明,随丁酮添加量的逐渐减少,凝固浴温度的增加,薄膜的孔隙率与透湿性呈现复杂的变换趋势,所以采用丁酮控制薄膜性能时,使用条件非常重要。

【Abstract】 MEK is used as one of solvents to make PU microporous film with hytrochemistry method.The effects of the rate of DMF/MEK and the temperature of condensing bath on the properties of PU films are studied.The conclusions are made that porosity shows a trend of increase with the ratio increases but a little decrease at the ratio reach to 2.5 and the WVT shows a trend of decrease ten increase with the temperature increases but a little decrease at 21℃.

【关键词】 聚氨酯微孔膜丁酮二甲基甲酰胺湿法成膜
【Key words】 PUmicroporous filmMEKDMFwater-laid film
【基金】 陕西省教育厅2005年自然科学专项,编号05JK204
  • 【文献出处】 化纤与纺织技术 ,Chemical Fiber & Textile Technology , 编辑部邮箱 ,2006年01期
  • 【分类号】TQ320.721
  • 【被引频次】19
  • 【下载频次】337
节点文献中: 

本文链接的文献网络图示:

本文的引文网络