节点文献

试论镁铝合金高应变率单轴压缩拟合本构关系的代入校核

ON THE CHECKING OF FITTED CONSTITUTIVE RELATION OF AN MG-AL ALLOY UNDER UNIAXIAL COMPRESSION AT HIGH STRAIN RATES

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王焕然谢书港陈大年俞宇颖刘国庆

【Author】 Wang Huan-ran1,Xie Shu-gang1,Chen Da-nian1,Yu Yu-ying1,2,Liu Guo-qing1(1.Mechanics & Materials Science Research Center,Ningbo University,Zhejiang 315211,China;2.National Key laboratory of Shock Wave and Detonation Physics Research,P.O.Box 919-102,Mianyang,Sichuan 621900,China)

【机构】 宁波大学力学与材料科学研究中心宁波大学力学与材料科学研究中心 浙江315211浙江315211浙江315211 冲击波物理与爆炸物理国家重点实验室四川绵阳621900

【摘要】 从实验与数值模拟的结合上,确定与考察了镁铝合金在一维应力高应变率压缩状态下的本构关系。把由一维准静态及动态压缩试验结果所拟合的经验性本构关系代入镁铝合金的SHPB试验的全过程数值模拟,可再现实验测得的反射波波形及透射波波形。数值模拟也表明,采用SHPB试验经典分析所估算的应力、应变、应变率与试件典型微元在试验过程中所经受的应力应变、应变率也基本一致,然而,应变率并非常值。

【Abstract】 The constitutive relation of an Mg-Al Alloy under uniaxial compression at high strain rates is fitted and checked using the SHPB(Split Hopkinson Pressure Bar)experimental results and the numerical simulation based on the fitted constitutive law of the specimen.Using the constitutive relation of the Mg-Al Alloy determined by quasi-static and dynamic compression tests in the one-dimensional simulation of the SHPB test,the reflected and transmitted pulses of SHPB tests can be reproduced.Furthermore,the stress,strain and strain rate of the Mg-Al Alloy obtained in the SHPB test are consistent with those estimated by the classical SHPB analyses.However,it should be noted that the strain rate of the specimen is not constant during SHPB test.

【基金】 国家自然科学基金项目(10472048);中国工程物理研究院专项基金(H02107)
  • 【文献出处】 工程力学 ,Engineering Mechanics , 编辑部邮箱 ,2006年09期
  • 【分类号】TG111
  • 【被引频次】10
  • 【下载频次】267
节点文献中: 

本文链接的文献网络图示:

本文的引文网络