节点文献

液闪法测量断裂带水中~3H计数效率的标定

THE QUENCHING CALIBRATION FOR TRITIUM DETERMINATION FROM FAULT ZONE BY LIQUID SCINTILLATION METHOD

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 尹金辉郑勇刚刘粤霞

【Author】 YIN Jin-hui ZHENG Yong-gang LIU Yue-xia(Institute of Geology,CEA,State Key Laboratory of Earthquake Dynamics,Beijing 100029,China)

【机构】 中国地震局地质研究所地震动力学国家重点实验室中国地震局地质研究所地震动力学国家重点实验室 北京100029北京100029

【摘要】 文中介绍了如何使用无氚水作为猝灭剂制备系列猝灭源,建立猝灭校正曲线,从而精确标定Quantulus1220液闪仪测量3H的计数效率。实验结果表明,直线拟合校正曲线计算的效率与测量值的偏差小,计数效率变动范围在21.59%~22.68%之间,系列猝灭源刻度仪器计数效率具有快速可靠等优点。

【Abstract】 This paper introduces a simple and practical way to construct quenching calibration curve for tritium DPM measurements basing on efficiencies of a series of known activity standard sources and quenching parameter SQP(E)used to define the quench level in Quantulus 1220.Ten standard sources and two test samples were prepared with tritium-free water as quenching materials and progressively added to Hisafe 3 cocktail.A linear curve or polynomial function curve was fitted with each pair of quench parameter SQP(E)and efficiency of standard source.The test sample demonstrated that the error of linear curve was small within routine quenching range of 776 to 785.Therefore,the quenching calibration curve can be beneficial to improving accuracy and reliability of tritium counting.

【基金】 国家发展与改革委员会发改投资“城市活断层试验探测”项目(20041138)资助
  • 【文献出处】 地震地质 ,Seismology and Geology , 编辑部邮箱 ,2006年04期
  • 【分类号】P597.1
  • 【下载频次】119
节点文献中: 

本文链接的文献网络图示:

本文的引文网络