【摘要】 对胶体电解质制备和不同类型胶体蓄电池(平板式、管式和功能性胶体蓄电池)装配进行了阐述,同时研究和讨论了搅拌速度对灌胶和化成性能的影响,最合适的灌胶条件为在常压下搅拌速度500～700r/min,流速为275g/min,最后对各种电池的初期性能和循环寿命进行了测试和分析。结果表明:胶体蓄电池比吸附玻璃纤维板(AGM)蓄电池有更好的低温放电性能和深的循环性能,其中,管式胶体电池循环寿命最长。更多还原

【Abstract】 Preparation of gelled-electrolyte and assembling of different kinds of VRLA batteries , including pasting plates ,tubular plates and functional gelled-electrolyte batteries, were instroduced in the paper. The effect of stirring rate on the performance of gelling and formation results were also researched and discussed. The results showed that gelled electrolyte had better performance and was easy to be filled into the case in the condition of stirring rate of 500～700 r/min and flow velocity of 275 g/min. Then premature performance and cycle life of different type of batteries were tested and analyzed. The results showed that gelled-electrolyte batteries had larger low temperature discharge capacity and cycle life than AGM batteries. Besides, the gel batteries with tubular plates had longer cycle life than any other batteries.更多还原