节点文献

占空比可调的超高频电火花加工脉冲电源的研制

Developing Ultrahigh Frequency Pulse EDM Generator of Adjustable Duty Ratio

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 曾伟梁朱保国王振龙

【Author】 Zeng Weiliang,Zhu Baoguo,Wang Zhenlong(Harbin Institute of Technology,Harbin 150001,China)

【机构】 哈尔滨工业大学机电工程学院哈尔滨工业大学机电工程学院 黑龙江哈尔滨150001黑龙江哈尔滨150001

【摘要】 从CPLD具有完全硬件逻辑的特点出发,提出了用CPLD发生占空比可调的超高频电火花加工脉冲信号的设想。通过利用多路(复用)器和计数器的连接与反馈,设计CPLD的数字逻辑算法,并在EPM7064中实现了占空比可调的超高频脉冲。在外部晶振频率为40 MHz下,通过模拟仿真和实际输出,得到了8 MHz的超高频脉冲,其占空比可调。

【Abstract】 This paper presents that developing ultrahigh frequency pulse EDM generator of adjustable duty ratio by CPLD based on the characteristic of CPLD,complete hardware logistic.Through connecting and feeding back multiplexer and counter,digital logic algorithm of CPLD is designed,ultrahigh frequency pulse signal of adjustable duty ratio is realized in EPM7064.When the frequency of outside crystal oscillator is 40 MHz,ultrahigh frequency pulse of 8 MHz is got,its duty ratio is adjustable.

  • 【文献出处】 电加工与模具 ,Electromachining & Mould , 编辑部邮箱 ,2006年04期
  • 【分类号】TG661
  • 【被引频次】4
  • 【下载频次】229
节点文献中: 

本文链接的文献网络图示:

本文的引文网络