节点文献

用ANUDEM建立水文地貌关系正确DEM的方法研究

Generating a hydrologically correct DEM with ANUDEM in the Loess Plateau of China

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨勤科Tim R McVicarTom G VanNielMike Hutchinson李领涛

【Author】 YANG Qin-ke~(①),Tim R.McVicar~(②),Tom,G.Van Niel~(③),Mike Hutchinson~(④),LI Ling-tao~(②)(①Institute of Soil and Water Conservation,Chinese Academy of Sciences and Ministry of Water Resources,Yangling 712100,China;②CSIRO Land and Water,GPO Box 1666,Canberra,2601,ACT,Australia;③CSIRO Land and Water,Private Bag No.5,Wembley,6913,WA,Australia;④Centre for Resource and Environmental Studies,Australian National University,Canberra,0200,ACT,Australia)

【机构】 中国科学院水利部水土保持研究所澳大利亚联邦科工组织水土资源研究所澳大利亚国立大学资源环境研究中心澳大利亚联邦科工组织水土资源研究所 陕西杨凌712100堪培拉泊斯

【摘要】 针对区域尺度的径流、水土流失定量评价和植被适宜性评价等研究工作需要,利用1∶25万数字地形图和ANUDEM软件,对黄土丘陵区中等分辨率水文地貌关系正确DEM建立方法进行了研究。结果表明该方法所建立的DEM,可以正确反映地貌梁、沟结构及其与流水线网络的关系,对地形描述的能力优于TIN方法建立的DEM;利用ANUDEM和1∶25万地形图插值建立黄土丘陵区DEM的三个主要参数分别为分辨率50或100,计算迭代次数40,第二糙率系数0.8。

【Abstract】 To meet the demand of regional soil erosion and hydrological modeling,ANUDEM has been applied to generate DEM with the 1:250,000 digital topographic map source data in Loess Plateau,and parameters have been optimized with varied tests.A hydrologically correct DEM has been generated and it can provide support to interpolate meteorology data in Loess hills area.As a result the shape of complex loess landscape is represented better than that with TIN derived DEM.The key parameters to run ANUDEM to construct DEM with 1:250,000 topographic map have been optimized,which including resolution,iteration number and 2nd roughness,should be 50-100,40 and 0.8 respectively.

【关键词】 黄土高原数字高程模型ANUDEMDEM分辨率
【Key words】 the Loess PlateauDEMANUDEMresolution of DEM
【基金】 中国科学院知识创新重要方向项目:黄土高原水土保持的区域环境效应研究(KZCX3-SW-421);中澳合作项目——黄土高原植被恢复重建设水环境效应研究(LWR1/2002/018)
  • 【文献出处】 测绘科学 ,Science of Surveying and Mapping , 编辑部邮箱 ,2006年06期
  • 【分类号】P284
  • 【被引频次】40
  • 【下载频次】456
节点文献中: 

本文链接的文献网络图示:

本文的引文网络