节点文献

含裂纹弯管的J估算方法的研究

Research on the J Estimation Method for Surface Cracked Elbows

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 郑敏荣朱健斌

【Author】 ZHENG Min-rong, ZHU Jian-bin (Department of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102600, China)

【机构】 北京石油化工学院机械系北京石油化工学院机械系 北京102600北京102600

【摘要】 介绍了一种解决含裂纹弯管问题的新方法。采用线弹簧壳体模型进行有限元计算求解含裂纹弯管的J积分 ,而后仿照EPRI方法的思路 ,给出了J估算式及其相关系数F1和h1。避免了EPRI方法在确定h1值时的缺点 ,提高了弹塑性转换区的J积分的准确性 ,所以无须对J积分的弹性部分于进行塑性修正。对于含周向裂纹情况 ,采用两种M0 的计算方法 (EPRI方法和净截面法NSC)所得到的h1值相比较发现 ,EPRI公式得到了较好的h1函数分布。其意义在于引入了线弹簧壳体模型 ,可以采用本文的有限元分析方法和J估算思路 ,补充更多的数据 ,使之成为一个可用于工程计算的体系

【Abstract】 A new method to solve cracked-elbow problem is introduced. Based on the line-spring shell model, J integral of circumferential and axial cracks in pipe elbows is calculated by EPRI method. Then by following the procedure of EPRI, F 1 function and h 1 function are given. This method avoids the disadvantage of determining h 1 in EPRI, thus the precision of J in transient area will be improved. For this reason, in the method a plastic zone correction to the part of J is not needed. For circumferential crack case, it has been found that the better h 1 function can be gotten by using EPRI method if two methods( EPRI and NSC) for determining M 0 are used. Since the line-spring shell model is introduced, the finite element method and J estimation idea can be adopted to increase more data in order to make it as practical engineering system.

  • 【文献出处】 石油化工高等学校学报 ,Journal of Petrochemical Universities , 编辑部邮箱 ,2002年01期
  • 【分类号】TB12
  • 【被引频次】1
  • 【下载频次】45
节点文献中: 

本文链接的文献网络图示:

本文的引文网络