节点文献

凝胶注模成型氧化锆耐火材料的研究

Study on gelcasting of zirconia refractories

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 易中周黄勇谢志鹏

【Author】 Yi Zhongzhou,Huang Yong,Xie ZhipengDepartment of Materials Science and Engineering,Tsinghua University,Beijing 100084,China

【机构】 清华大学材料科学与工程系清华大学材料科学与工程系 北京100084云南蒙自师范高等专科学校北京100084北京100084

【摘要】 研究了以粒径分布较宽的粗颗粒氧化锆粉末制成浆料的 ζ电位、流变特性及其凝胶注模成型技术。结果表明 ,用适量的分散剂SD - 0 0调整浆料的pH值 =8.5~ 10 .13,即可制备出固相含量高达 6 5 %(体积分数 )的氧化锆浓悬浮体。凝胶注模成型出的氧化锆坯体性能良好 ,其体积密度为 4 .12 g·cm- 3,抗折强度达 2 1.4 3MPa。

【Abstract】 The Zeta potential of ZrO 2 powders,the rheological properties of concentrated suspensions of ZrO 2 with coarse powders and its gelcasting were discussed in detail.The experimental results indicate that the concentrated suspension of ZrO 2 with solid content of 65 vol% was prepared by adjusting pH value of the slurry ranged from 8.5 to 10.13 using proper dispersant.The performance of green bodies of zirconia refractories formed by gelcasting is favorable.The bulk density and modulus of rupture of green body measured were 4.12 g·cm -3 and 21.43 MPa,respectively.

【关键词】 凝胶注模成型氧化锆耐火材料
【Key words】 GelcastingZirconiaRefractories
【基金】 国家 973计划资助项目 (G2 0 0 0 0 672 0 4 - 0 1 )。
  • 【分类号】TQ175.7
  • 【被引频次】57
  • 【下载频次】619
节点文献中: 

本文链接的文献网络图示:

本文的引文网络