节点文献

高速电弧喷涂铁铝涂层的组织和性能

Microstructure and Properties of Iron Aluminide Coatings Prepared by High Velocity Arc Spraying

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 朱子新徐滨士马世宁杜则裕

【Author】 ZHU Zi xin 1,2 ,XU Bin shi 2,MA Shi ning 2,DU Ze yu 1 (1.School of Material Science & Engineering,Tianjin University,Tianjin 300072,China; 2.Surface Engineering Research Institute of CMES,Beijing 100072,China)

【机构】 天津大学材料科学与工程学院中国机械工程学会表面工程研究所天津大学材料科学与工程学院 天津300072中国机械工程学会表面工程研究所北京100072天津300072

【摘要】 采用粉芯丝材和高速电弧喷涂技术 (HVAS)原位合成了铁铝金属间化合物涂层 ,并研究了涂层的显微组织和性能。结果表明 ,铁铝涂层的成分 (原子分数 ,% )为Fe 2 0 0Al 14 1O ,主要相是Fe3 Al、FeAl和α Fe相 ,还有少量Al2 O3 。涂层中的Fe3 Al和FeAl具有较高的有序度。涂层具有相对较高的结合强度和显微硬度 ,以及较低的密度和孔隙率

【Abstract】 In the present study,the microstructure and properties of iron aluminide intermetallic coatings in situ synthesized by cored wire and high velocity arc spraying(HVAS)were investigated.Chemical analysis of the coating indicated the composition is Fe 20 0Al 14 1O(at%).The microstructure is consisted of Fe 3Al,FeAl and α Fe regions mainly,together with fine oxide(Al 2O 3)layers.Moreover,Fe 3Al and FeAl in the coating have high degree of order.The coating has relatively higher adhesion strength and microhardness,as well as lower density and porosity.

【基金】 国家自然科学基金项目 (50 0 0 50 2 4 )
  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2002年03期
  • 【分类号】TG174.442
  • 【被引频次】16
  • 【下载频次】169
节点文献中: 

本文链接的文献网络图示:

本文的引文网络