节点文献

脉冲电流退火对Fe73.5Cu1Nb3Si13.5B9合金薄带巨应力阻抗效应的影响

Giant Stress impedance Effect in Amorphous and Electropulsing Annealed Fe73.5Cu1Nb3Si13.5B9 Ribbons

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 高振李德仁张峻峰刘辉卢志超周少雄

【Author】 Gao Zhen,Li Deren,Zhang Junfeng,Liu Hui,Lu Zhichao,Zhou Shaoxiong (National Amorphous and Nanocrystalline Alloy Engineering Research Center,Central Iron and Steel Research Institute,Beijing 100081,China)

【机构】 钢铁研究总院钢铁研究总院 国家非晶微晶合金工程技术研究中心北京100081国家非晶微晶合金工程技术研究中心北京100081国家非晶微晶合金工程技术研究中心北京100081

【摘要】 研究了脉冲电流退火工艺对非晶Fe73 5Cu1Nb3 Si13 5B9合金薄带巨应力阻抗 (GSI)效应的影响。结果表明 ,在外加 10 0MPa拉应力下对非晶合金进行脉冲电流退火后 ,巨应力阻抗效应显著提高 ,并且ΔZ/Z最大值随退火电流密度的增加而增加 ,当退火电流密度为 930A/mm2 时 ,阻抗的最大相对变化达到 35 0 %。

【Abstract】 The giant stress impedance(GSI) effect in amorphous and high current density electropulsing annealed Fe 73 5 Cu 1Nb 3Si 13 5 B 9 ribbons has been investigated The results show that the GSI effect changes drastically with annealing process and the maximum stress impedance ratio of 350% is obtained with optimal conditions of current annealing The behaviors of the stress impedance vary with densities of annealing current and the tensile stress longitudinally applied during annealing process The maximum value of stress impedance ratio exists in the sample annealed by high current density electropulsing under applied tensile stress of 100MPa

  • 【文献出处】 金属功能材料 ,Metallic Functional Materials , 编辑部邮箱 ,2002年02期
  • 【分类号】TG139.8
  • 【被引频次】8
  • 【下载频次】101
节点文献中: 

本文链接的文献网络图示:

本文的引文网络