节点文献

造纸湿部中施胶铝盐的电荷分析

Charge Analysis of Sizing Aluminum Compounds on Wet End

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 龙柱陈蕴智王海毅谢来苏杨淑蕙

【Author】 LONG Zhu,CHEN Yun-zhi,WANG Hai-yi,XIE Lai-su,YANG Shu-hui (Tianjin Institute of Light Industry,Tianjin300222,China)

【机构】 天津轻工业学院天津轻工业学院 天津300222天津300222天津300222

【摘要】 运用胶体滴定方法对几种施胶铝盐在施胶时的造纸湿部浆料电荷变化进行了研究。结果表明,随着聚合氯化铝-有机高分子复合物(PACP)用量的逐渐增加,麦草浆的胶体滴定比率(CTR值)明显增大;加入相同用量的PAC或PACP时,纸浆的CTR值随pH值的增大而增大;在相同pH值及相同用量的条件下,CTR值由高到低的顺序为:PACPc>PAC>PACPa。对于PACPa,CTR值随有机高分子/铝比值(O/A)的增加而降低;而PACPc的CTR值随该比值的增加而增加。

【Abstract】 The change of charge on wet end when some aluminum compounds were added in the sizing were studied by colloid titration method.The results show that:the colloid titration ratio (CTR)of wheat straw pulp increases with the increase of quantity of composites of PAC-organic polymer.When the same quantity of PAC or PACP are added,CTR of the pulp will increases with the increase of pH value.In the condition of the same pH value and quantity,the sequence of from high to low of CTR value is:PACPc>PAC>PACPa.To PACPa,CTR decreases with the increase of organic polymer /aluminum(O /A)(ratio);however,the CTR of PACPc increases with the increase of O /A.

【基金】 华南理工大学制浆造纸工程国家重点试验室基金资助项目
  • 【文献出处】 造纸化学品 ,Paper Chemicals , 编辑部邮箱 ,2001年04期
  • 【分类号】TS714
  • 【下载频次】72
节点文献中: 

本文链接的文献网络图示:

本文的引文网络