节点文献
数控车削中凸变椭圆型面的成形方法
The Shaping Method of Middle Convex and Varied Elliptic Pattern with NC Turning
【摘要】 主要研究数控车削中凸变椭圆型面的成形方法。提出了将型面先分解、后合成的成形机理 ,将中凸变椭圆的型面分解为“椭圆”、“变椭圆”和“中凸”三个基本特征 ,对每一种特征进行了数学描述 ,并提出了相应的成形方法。采用微椭圆柱逼近整个型面 ,生成控制刀具运动轨迹的加工数据文件
【Abstract】 This article mainly studied the shaping method of middle convex and varied elliptic pattern. The shaping mechanism of first resolving then composing pattern is posed in this paper. Middle convex and varied elliptic pattern is divided into the three basic characteristics of ellipse, varied ellipse and middle convex, and each was described in mathematical manners and had they own shaping methods relevantly. At last, the whole pattern is approached with the micro elliptic cylinders, and the machining data for controlling the motion track of cutting tool were generated.
【关键词】 数控;
非圆加工;
成形方法;
活塞;
【Key words】 numerical control noncircular machining shaping method piston;
【Key words】 numerical control noncircular machining shaping method piston;
- 【文献出处】 中国机械工程 ,China Mechanical Engineering(中国机械工程) , 编辑部邮箱 ,2001年08期
- 【分类号】TG519.1
- 【被引频次】31
- 【下载频次】135