【摘要】 硬盘以其容量大 ,速度快等特点倍受微机用户的青睐 ,已成为当前微机配置必不可少的外部设备 .但由于其使用率高 ,若有误操作 ,维护不当 ,病毒攻击或环境影响等方面的因素时 ,常出现硬盘不能自举的软故障 ,在此情况下 ,均令不少用户感到无从下手 ,唯有重做硬盘 ,这样既浪费了大量宝贵时间 ,又可能丢失许多有用的数据 ,同时也会缩短硬盘的寿命 .实际上 ,若了解了系统自举过程 ,根据错误提示 ,就可对症下药 ,采取相应的对策进行修复 .本文第一部分首先给出了硬盘自举过程的机理及系统自举过程中可能由于某种软故障而给出的错误提示 ;第二部分逐一给出根据不同的错误提示信息所做的相应故障分析及修复方法更多还原

【Abstract】 Harddisk is most favorited by the micro computer user with its wide capacity and high speed and becomes the necessary device of disposing micro computer nowadays.But because of the frequent usage,with the factors of false opertion,uncorrect maintainance,virus infection and enviroment influence etc.,the harddisk often appears the failure of software that can’t boot.Under such condition,a lot of users don’t know what to do,only to make harddisk again,thus they waste a great of precious time and lose many useful datas,at the same time also shorten the harddisk’s using age.In fact,if the procedure of the harddisk booting is known well,according to the wrong signal,it can be suited the remedy to the case and repaired relatively.This essay first provides the mechanism of the procedure of the harddisk booting and the wrong singal because of some possible failure of software during the procedure of the harddisk booting.Then Provides the relative failure analysis and repairing methods one by one according to different wrong signals.更多还原