节点文献

钻井井壁可缩性接头模型试验研究

Modeling experiments and studies on retractable flanging device for shaftwalls

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 程桦杨俊杰姚直书吴文彬林鸿苞黄定华陈锡亮

【Author】 CHENG Hua 1,YANG Jun jie 1,YAO Zhi shu 1, WU Wen bin 2, LIN Hong bao 2, HUANG Ding hua 3, CHEN Xi liang 3(1 Huainan Institute of Technology,Huainan 232001,China;2 Nanjing Coal Mine Design and Research Institute,Nanjing 210000,China;3 H

【机构】 淮南工业学院煤炭工业局南京设计研究院淮北矿业集团淮北矿业集团 安徽淮南232001安徽淮南232001江苏南京210000安徽淮北235000安徽淮北235000

【摘要】 针对新型竖向可缩性钻井井壁 ,提出了两种可缩性接头结构形式 ,并进行了竖向、侧向和三轴加载模型试验 .研究结果表明 ,两种结构形式的可缩性接头均具有良好的竖向变形特性 ,抗侧压能力大 ,防水性能好 .研究成果在淮北许疃矿得到了应用

【Abstract】 The paper presents structural forms of two compressive joints according to the new vertical compressive shaft boring lining , and the tests are done about the compressive joints under vertical load on, side load on and tri axial load on.The test results show that the two structural forms of compressive joint both is of fine property of vertical deformation, property of resist compression and property of water protection. Study results of this paper was applied at Xutuan Coal Mine of Huaibei.

  • 【文献出处】 煤炭学报 ,Journal of China Coal Society , 编辑部邮箱 ,2001年06期
  • 【分类号】TD265.32
  • 【被引频次】22
  • 【下载频次】139
节点文献中: 

本文链接的文献网络图示:

本文的引文网络