节点文献

造纸废液喷雾干燥工艺参数影响因素探讨

EXPLORATION ON TECHNOLOGICAL PARAMETERS IN SPRAY DRYING OF PULPING WASTE LIQUOR

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 黄立新韩磊唐金鑫王宗濂

【Author】 HUANG Li xin, HAN Lei, TANG Jin xin, WANG Zong lian(Research Institute of Chemical Processing and Utilization of Forest Products, CAF, Nanjing 210042, China)

【机构】 中国林业科学研究院林产化学工业研究所!江苏南京210042

【摘要】 通过对目前造纸工业中 6种主要造纸废液的成分对喷雾干燥工艺参数造成影响的研究 ,得出了不同造纸废液的喷雾干燥有不同的工艺条件 ,分析了废液的浓度、温度和粘度之间的相应关系 ,最后针对喷雾干燥出口温度高、热效率较低的特点 ,提出了用干燥后的热尾气浓缩稀废液的节能新工艺

【Abstract】 In this paper, the effect of chemical composition of pulping waste liquor toward the spray drying technological parameters were explored. The results showed that different technological conditions of spray drying should be adopted for different pulping waste liquor. The relations between solid content, temperature and viscosity of waste liquor were analyzed. Considering the high outlet temperature and low heat efficiency of spray drying, a new energy saving technological process was suggested, in which thin waste liquor is concentrated by using the discharged waste gas from spray drying.

【关键词】 造纸废液喷雾干燥
【Key words】 pulping waste liquorspray drying
  • 【文献出处】 林产化学与工业 ,Chemistry & Industry of Forest Products , 编辑部邮箱 ,2001年01期
  • 【分类号】X793
  • 【被引频次】8
  • 【下载频次】124
节点文献中: 

本文链接的文献网络图示:

本文的引文网络