节点文献

Na2WO4-WO3-ZnO体系熔盐镀钨

Tungsten electrodeposition in Na2WO4-WO3-ZnO molten salts

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 马瑞新周传华李国勋王超群孙丽虹

【Author】 MA Rui xin, ZHOU Chuan hua, LI Guo xun, WANG Chao qun, SUN Li hong (General Research Institute for Non ferrous Metals, Beijing 100088, P.R.China) [

【机构】 北京有色金属研究总院!北京100088

【摘要】 对Na2 WO4 WO3 ZnO体系熔盐镀钨工艺进行了详细研究 ,得到了获得金属钨镀层的工艺条件。结果表明 :在空气气氛中 ,当氧化钨的浓度为 1 5%~ 30 %时 ,于 850~ 950℃能得到金属钨镀层且镀层表面平整 ;当其它条件都相同时 ,在铜基体上获得钨镀层比钼基体上所需的温度略高一些 ;扫描电镜照片显示钨镀层与钼基体之间有明显分界面 ,元素线扫描结果证实镀层与钼基体间扩散层厚度仅为 2 .5μm ,基本不形成扩散层 ;不同电流密度下所获得的钨镀层X射线衍射表明镀层中存在织构。

【Abstract】 The tungsten electrodeposition process in Na 2WO 4 WO 3 ZnO molten salts has been approached in details. The optimized conditions for tungsten coatings have been obtained. When the concentration of WO 3 ranges between 15% and 30%(mole fraction) a plain tungsten coating can be achieved in an open air condition at 850~950 ℃. The temperature for tungsten coating on copper substrate is higher than that on molybdenum. SEM shows that there is a distinct interface between tungsten coating and substrate. ELS(element linear sweep) indicates that there is a very thin diffusion layer between tungsten coating and molybdenum substrate. X ray diffraction displays that there are textures in the tungsten coatings. [

【基金】 国家自然科学基金!资助项目 ( 59774 0 2 5)
  • 【文献出处】 中国有色金属学报 ,THE CHINESE JOURNAL OF NONFERROUS METALS , 编辑部邮箱 ,2000年05期
  • 【分类号】TQ15
  • 【被引频次】16
  • 【下载频次】238
节点文献中: 

本文链接的文献网络图示:

本文的引文网络