节点文献

EPDM胶料中发泡剂H的分解特性研究

Decomposition characteristics of blowing agent H in EPDM compound

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 彭宗林王君张祥福张隐西

【Author】 PENG Zonglin,WANG Jun,ZHANG Xiangfu,ZHANG Yinxi(Shanghai Jiaotong University,Shanghai 200240,China)

【机构】 上海交通大学化学化工学院!上海200240

【摘要】 选用EPDM作橡胶介质 ,重点测试了发泡剂H在EPDM胶料中的分解温度、发气量及分解速度等参数。试验结果表明 ,有机发泡剂 (AC ,H和OBSH)在EPDM胶料中的分解温度低于它们在空气中的分解温度 ,而无机发泡剂 (碳酸氢钠和碳酸氢铵 )则刚好相反 ;不同牌号的EPDM胶料对发泡剂H的热分解影响并不显著 ;发泡剂H的热分解主要受氧化锌和硬脂酸等配合剂的影响 ,分解温度降低至 134℃ ;在较高温度下发泡剂H的起始分解时间提前且发气量增大

【Abstract】 The decomposition temperature(T d),gas evolution and decomposition rate of blowing agents,especial blowing agent H(dinitrosopentamethylenetetramine) in EPDM compounds were investigated.The results showed that in contrast with those of the inorganic blowing agents(sodium bicarbonate and ammonium bicarbonate),the decomposition temperatures of organic blowing agents(AC,H and OBSH) in EPDM compound were lower than those in atmosphere;different brands of EPDM didnt show remarkable effect on the thermal decomposition of blowing agent H;the decomposition temperature of blowing agent H decreased to 134 ℃ in the presence of zinc oxide and stearic acid;and the decomposition of blowing agent H started earlier and the gas evolution increased at elevated temperature.

【关键词】 EPDM发泡剂分解温度发气量
【Key words】 EPDMblowing agentdecomposition temperaturegas evolution
  • 【文献出处】 橡胶工业 ,CHINA RUBBER INDUSTRY , 编辑部邮箱 ,2000年08期
  • 【分类号】TQ330
  • 【被引频次】17
  • 【下载频次】283
节点文献中: 

本文链接的文献网络图示:

本文的引文网络