节点文献

原位生成TiC/Ti5Si3纳米复合材料的显微结构研究

Microstructure of in Situ Produced TiC/Ti5Si3 Nanocomposite

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李建林江东亮谭寿洪

【Author】 LI Jian-Lin, JIANG Dong-Liang, TAN Shou--Hong (State Key Lab of High Perfoumance Ceramics and Superfine Microstructure Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China)

【机构】 中国科学院上海硅酸盐研究所高性能陶瓷和超微结构国家重点实验室!上海200050

【摘要】 研究了原位生成TiC/Ti5Si3纳米复合材料的显微结构.实验结果表明,以SiC和Ti 为原料,通过反应热压工艺可以原位合成TiC/Ti5Si3复合材料,其中的大部分TiC粒子为纳 米粒子.TiC晶粒与Ti5Si3晶粒的晶界上存在原子台阶.复合材料还含有少量Ti3SiC2相.这 些Ti3SiC2相主要呈棒状分布在Ti5Si3基体中,另有少量Ti3SiC2相位于大的TiC晶粒内.

【Abstract】 The microstructure of in situ produced TiC/Ti5Si3 nanocomposite was studied. The results show that TiC/Ti5Si3 nanocomposite can be fabricated by reactively hot pressing the mixed powders of SiC and Ti. Almost TiC grains are nanosized, and there is a small amount of Ti3SiC2 in this nanocomposite. Some elongated Ti3SiC2 grains are located in Ti5Si3 matrix and the rest Ti3SiC2 grains in TiC grains. There is no amorphous phase on the grain boundaries of TiC and Ti5Si3 or TiC and Ti3SiC2. Some monatomic steps can be observed at the grain boundary of TiC and Ti5Si3.

【关键词】 原位碳化钛硅化钛纳米复合材料
【Key words】 in situTiCTi5Si3nanocomposite
  • 【文献出处】 无机材料学报 ,JOURNAL OF INORGANIC MATERIALS , 编辑部邮箱 ,2000年02期
  • 【分类号】TB33
  • 【被引频次】24
  • 【下载频次】246
节点文献中: 

本文链接的文献网络图示:

本文的引文网络