节点文献

复合二氧化钛膜的研制

Preparation of supported microporous TiO2 membrane

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈大鹏郭国霖李崇嘉

【Author】 Chen Dapeng 1, Guo Guolin 2, Li Chongjia 1 (1 Department of Chemical Engineering, Harbin University of Engineering,?Harbin 150001; 2 State Key Lab for Structural Chemistry of Unstable and Stable Species,Peking University,?Beijing 100871)

【机构】 哈尔滨工程大学化学工程系!哈尔滨150001北京大学分子稳态与动态国家重点实验室!北京100871

【摘要】 用溶胶 -凝胶法在多孔α -Al2 O3陶瓷衬底上制备了TiO2 微孔膜 ,经激光光散射仪、X -射线衍射仪、扫描电子显微镜、孔率计等对胶粒的大小、膜的结构、形貌和孔径分布等进行了表征 ,发现在孔直径为 0 .5μm的多孔载体上经浸渍 -干燥 -焙烧过程 ,能制得对牛血清白蛋白 (BSA)有 73.5%~ 92 .7%截留率、通量在 0 .2MPa压差下约 52L/(m2 ·h)的超滤膜 .

【Abstract】 Titania microporous membranes were prepared by sol-gel process.The titania sol obtained from hydrolysis of titanium tetra-isopropoxide was applied to porous-alumina substrate by a dipping process.Paritcle sizes in sol phase were examined by the dynamic laser-scattering technique.The properties of membrane were characterized by x-ray diffraction,scanning electron microscopy (SEM) and a mercury porosimeter.The porous titania membranes supported on porous ceramic with pore size 0.5 μm were prepared through coating-drying-calcining procedure.It is found that the rejection of these membranes for BSA was 73.5%~92.7% and flux was about 52 L (m 2·h).

  • 【文献出处】 膜科学与技术 ,MEMBRANE SCIENCE AND TECHNOLOGY , 编辑部邮箱 ,2000年03期
  • 【分类号】TQ13
  • 【被引频次】16
  • 【下载频次】219
节点文献中: 

本文链接的文献网络图示:

本文的引文网络