节点文献

后牙全瓷冠的三维有限元分析

Three-dimensional Finite Element Analysis or All-ceramic Crowns of the Posterior Teeth

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张并生赵云凤王华蓉

【Author】 Zhang Bingsheng; Zhao Yunfeng; Wang Huarong(Dapartment of Prosthodontics, School of Stomatology, WCUMS, Chengdu 610041)

【机构】 华西医科大学口腔医学院口腔修复学教研室!成都610041山西医科大学口腔医院

【摘要】 全瓷冠因其美观、生物相容性好,正逐渐应用于临床。本研究采用三维有限元法,分析下颌第一磨牙全瓷冠不同颈缘形态的应力分布规律,旨在为全瓷冠的临床应用提供依据。结果:全瓷冠承受垂直载荷时,■龈向主要产生压应力,颊侧颈缘有张应力集中;全瓷冠表面应力>冠内应力>制备体应力;台肩型较凹面型全瓷冠的应力值小。由此提示,临床制作全瓷冠时宜设计台肩型,冠颈缘厚度应在0.5~1.0mm之间,冠表面应高度抛光,去除微裂纹,以提高全瓷冠的抗折能力。

【Abstract】 The all-ceramic crown has been applied in clinical practice for its esthetic value and excellent biocompatibility. The purpose of this study was to examine the effect of different cervical marginal shapes on the stress distribution of all-ceramic crowns of the mandibular first molar by three-dimensional finite element analysis.The results showed that under vertical loading, the bearing compress stress on the occlusal region, the tensile stress concentration were observed at buccal cervical marginal of all-ceramic crowns; the stress at the surface of the crown was the highest, the stress inside the crown was higher than that inside the prepared teeth; the shoulder’s stress value was lower than the cham fer’s. These results lay the theoretic foundation for clinical application of all-ceramic crown, suggesting that the shoulder design should be recommended in clinical practice when the all-ceramic crowns are planned. The cervical thickness of the crown should be within 0. 5-1.0mm, and the crowns surface should be polished well to improve its resistance to fracture.

【基金】 国家自然科学基金!39270728
  • 【文献出处】 华西医科大学学报 ,JOURNAL OF WEST CHINA UNIVERSITY OF MEDICAL SCIENCES , 编辑部邮箱 ,2000年02期
  • 【分类号】R322.41
  • 【被引频次】34
  • 【下载频次】180
节点文献中: 

本文链接的文献网络图示:

本文的引文网络