节点文献
混凝—缺氧—好氧工艺处理纺织印染废水
Treatment of textile printing and dyeing wastewater by coagulation—anoxia—aerobe technology
【摘要】 采用混凝—水解酸化—生物接触氧化工艺流程处理纺织印染废水 ,处理量 40 0 0 m3/d。进水 CODCr1 0 0 0~ 30 0 0 mg/L、色度 51 2~ 1 0 2 4倍、p H 1 1~ 1 3。从 1 998年 7月开始运行至今 ,CODCr平均去除率为 92 .32 % ,色度平均去除率为 92 .1 9% ,出水 p H值为 7,出水各项指标均符合《纺织染整工业水污染物排放标准》GB42 87—1 992一级标准的要求 ,运行结果表明 ,该工艺处理效果稳定、耐冲击负荷强、工艺组合合理。
【Abstract】 Textile printing and dyeing wastewater is treated with coagulation hydrolytic acidification, and biological contact oxidation process:treating quantity 4 000 m 3/d,inflow COD Cr value is 1 000~3 000 mg/L,chromaticity value is 512~1 024 times,pH is 11~13.From its running in July, 1998 till now,the average removal efficiencies of COD Cr and chromaticity are 92.32% and 92.19% respectively,and pH of effluent value is 7. All the quality indexes of the treated water fit Grade One requirement of 《Discharge Standard of Industrial Wateqr Pollution of Printing and Dyeing》(GB4287-1992).The running results show that the treatment efficiency of the technology is stable,tolerable shock load range is wide and the combination of processes is reasonable.
【Key words】 wastewater of printing and dyeing treatment; coagulation,hydrolytic acidification; biological contact oxidation;
- 【文献出处】 工业水处理 ,INDUSTRIAL WATER TREATMENT , 编辑部邮箱 ,2000年08期
- 【分类号】X703
- 【被引频次】18
- 【下载频次】336