节点文献

微观结构尺寸对钢疲劳性能的影响

The Effect of Microstructure Sizes of Steel on Fat

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 詹爱嫦; 高威; 孙永奇;

【Author】 Zhan Aichang Gao Wei Sun Yongqi (Mechanical Eng.Dept.,NWITST,Xian 710048,PRC)

【机构】 西北纺织工学院机械系!710048;

【摘要】 研究了超高强度钢 30 Cr Mn Si Ni2 A的微观结构尺寸对其疲劳性能的影响 .试验结果表明 :在淬火 +低温回火状态下 ,这种钢的旋转弯曲疲劳极限σ- 1随其微观结构尺寸(原奥氏体晶粒或马氏体束径尺寸 )的减小而提高 ,且有关系式σ- 1=σ0 +kd- 1/ 2 .这样 ,就可以通过测量钢的微观结构尺寸来估算其疲劳性能

【Abstract】 The influence of microstructure sizes of high strength steel 30CrMnSiNi2A on its fatigue properties was experimentally investigatel.The experiment results indicated that the fatigue limit of this steel (quenced and low tempered) σ -1  increased as its microstructure sizes decreased.They were related to the following equation:σ -1 =σ 0+kd -1/2 .Thus,using this equation,the fatigue properties of the steel can be estimated by measuring its microstructure sizes.

【关键词】 钢; 微观结构尺寸; 疲劳强度;
【Key words】 steel; microstructure sizes; fatigue strength;
  • 【文献出处】 西北纺织工学院学报 ,JOURNAL OF NORTHWEST INSTITUTE OF TEXTILE SCIENCE AND TECHNOLOGY , 编辑部邮箱 ,1999年04期
  • 【分类号】TG113.25
  • 【被引频次】5
  • 【下载频次】126
节点文献中: 

本文链接的文献网络图示:

本文的引文网络