节点文献

淬火温度对冷拉态Fe-18Mn-5Si-8Cr-4Ni形状记忆合金回复应力的影响

Effect of the Quenching Temperature on the Shape Recovery Stress of Fe-18Mn-5Si-8Cr-4Ni Shape Memory Alloy as Cold-Drawing

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 文玉华李宁陈孟诗涂铭旌李平全刘迎来马颖丽

【Author】 WEN Yuhua 1,LI Ning 1,CHEN Mengshi 1,TU Mingjing 1,LI Pingquan 2,LIU Yinglai 2,MA Yingli 2 1 Department of Materials Shaping and Controlling Engineering,Sichuan University,Chengdu,610007,China; 2 Xi′an Petroleum Pipe Research Institute,Xi′a

【机构】 四川大学材料成形与控制工程系!四川成都610065西安石油管材研究所!陕西西安710065西安石油管?

【摘要】 研究了淬火温度对Fe - 18 Mn - 5Si - 8Cr - 4Ni 记忆合金回复应力的影响。结果表明:合金经变形后加热时产生的最大回复应力σh 和加热后冷却到室温时的回复应力σc 都随淬火温度的升高而增加,在650 ℃达到最大值;随后随淬火温度的进一步升高而快速下降,但是σc 下降的程度要比σh 大得多;当淬火温度高于850 ℃后,淬火温度的进一步升高对它们几乎没有影响;任一淬火温度下,加热后冷却到室温时的回复应力 σc都远大于加热时产生的最大回复应力σh。

【Abstract】 The effect of quenching temperature on the recovery stress of Fe-18Mn-5Si-8Cr-4Ni shape memory alloy has been studied.The results showed that both the meximum recovery stress σ h in heating and the recovery stress σ c at room temperature after heating increased as quenching temperature increased,both σ h and σ c reached maximum at 650℃,and then decreased rapidly with the further increase in quenching temperature,but the descent degree of σ c was far bigger than that of σ h;When the quenching temperature wsa higher than 850℃,the further increase in quenching temperature had little effect on them;At random quenching temperature,σ c was far bigger than σ h.

【关键词】 形状记忆合金淬火回复应力
【Key words】 shape memory alloyquenchingrecovery stress
【基金】 四川联合大学青年基金
  • 【文献出处】 功能材料 ,JOURNAL OF FUNCTIONAL MATERIALS , 编辑部邮箱 ,1999年06期
  • 【分类号】TG15
  • 【被引频次】18
  • 【下载频次】129
节点文献中: 

本文链接的文献网络图示:

本文的引文网络