【摘要】 用光反射法和重量法研究了化学抛光液组成和操作条件对抛光效果的影响，讨论了抛光机理．最佳抛光液组成和操作条件如下：磷酸硫酸体积比８０∶２０，硫酸镍１０ｇ／Ｌ，ＹＧ０５添加剂０６ｇ／Ｌ，水含量小于等于１５ｇ／Ｌ，温度７５℃，抛光时间４ｍｉｎ．生产应用表明，磷酸硫酸体系抛光液及其抛光工艺具有铝合金表面光亮度高、反应温度低和无黄烟等优点，完全可以代替用磷酸硫酸硝酸体系抛光液对铝合金的化学抛光．更多还原

【Abstract】 Influence of composition of chemical polishing solution and operating conditions on the polishing effect of aluminium alloy was studied using optical reflection method and gravimetric method,and the polishing mechanism was discussed. The optimum composition of polishing solution and operating condition are as follows: volume ratio of phosphoric acid sulfuric acid of 80∶20,nickel sulfate concentration of 1 0g/L,YG05 additives concentration of 0 6g/L,water content less than 15g/L,temperature of 75℃,and polishing time of 4 min. It is shown from the experiments that the phosphoric acid sulfuric acid system polishing solution and its polishing technology have some advantages such as highly bright surface of aluminium alloy,low reaction temperature and free of yellow smoke pollution. This polishing solution can be used for chemical polishing of aluminium alloy in place of phosphoric acid sulfuric acid nitric acid system polishing solution.更多还原