【作者】 杨文远； 李林； 彭小艳； 王明林； 高飞； 史晓强；

【Author】 Yang Wenyuan;Li Lin;Peng Xiaoyan;Wang Minglin;Gao Fei;Shi Xiaoqiang;Metallurgical Technology Institute, Central Iron and Steel Research Institute;Thermal Equipment and Material Department, New Metallurgy Hi-Tech Group Co., Ltd.;National Engineering Research Center of continuous Casting Technology, Central Iron and Steel Research Institute;

【机构】 钢铁研究总院冶金工艺研究所； 新冶高科技集团有限公司热工装备与材料事业部； 钢铁研究总院连铸中心；

【摘要】 为了提高复吹转炉透气砖寿命和冶金效果,研究了大流量透气砖底吹不对称供气技术。采用水模试验方法,底吹气量按3.3:1分两路供气,每隔1炉交换一次。试验结果表明,供气强度在0.2 Nm~3/t.min时,透气砖侵蚀速度与单根毛细管的气体流量成正比。毛细管根数增加1倍,透气砖的供气能力提高1倍。采用大流量大尺寸透气砖不对称交错供气的技术,可使透气砖的侵蚀速度减少50%,寿命提高1倍。转炉炼钢的熔池混匀时间缩短19.2%,铁水脱磷预处理熔池混匀时间缩短63%,复吹转炉的冶金效果得到明显改善。与复吹转炉预埋透气砖和更换透气砖的方法相比,可以更有效的提高转炉的复吹炉龄和冶金效果。更多还原

【Abstract】 In order to improve service life of Multiple Hole Plug(MHP) and metallurgical effect for combined blowing converter, new asymmetric alternating gas supplying technology for large flow capillary MHP was investigated. Use water model experiment, as well as the gas flow ratio of the two branches is 3.3:1 and alternates each heat. The results illustrated that the corrosion rate of the MHP is proportional to the gas flow of each capillary when the bottom gas supply intensity is 0.2 Nm~3/t. min. The quantity of capillary increases 1 time, and then the gas supply ability of MHP rise 1 time. The corrosion rate of MHP can be reduced 50% and the life of MHP can be increased 1 time through the application of large flow capillary MHP with big size and asymmetric alternating gas supplying technology at bottom. The mixing time of converter molten steel bath and hot metal dephosphorization pretreatment bath can be reduced 19.2 and 63% respectively by using asymmetric alternating gas supplying technology, therefore the metallurgical effect of the converter are improved remarkably. The asymmetric alternating gas supplying technology of large flow capillary MHP can improve the combined blowing furnace campaign and metallurgical effect significantly compared with the method of pre-embedded MHP and replacing the MHP in combined blowing converter.更多还原