【作者】 何亚峰； 干为民； 卢文壮； 赵建社； 肖华星； 杨振文；

【Author】 He-yafeng;Gan-weiming;Lu-wenzhuang;Zhao-jianshe;Xiao-huaxing;Yang-zhenwen;Department of Mechanics and Vehicle,Changzhou Institute of Technology;Nanjing University of Aeronautics and Astronautics,Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology;Digital Electrochemical machining key Laboratory of Jiangsu Province;

【机构】 常州工学院机械与车辆工程学院； 南京航空航天大学江苏省精密与微细制造技术重点实验室； 江苏省数字化电化学加工重点实验室；

【摘要】 钛合金Ti6A14V材料被广泛应用于航空航天等行业中。为了获得高的钛合金加工表面质量,本文进行了侧流式电解加工钛合金研究,在电解加工流道设计和分析基础上开展试验,得到了加工后钛合金表面形貌和能谱,研究了不同进给速度对加工平均电流、平衡间隙和表面粗糙度的影响关系,其结果可为电解加工钛合金提供一定的理论依据和参考。更多还原

【Abstract】 It is widely used for titanium alloy T16A14 V material in aerospace and other industries.In order to obtain high processing surface quality about titanium alloy,the side flow type electrochemical machining of titanium alloys are carried in this paper,surface morphology and energy spectrum of titanium alloy are obtained thought experiment based on electrochemical machining channel design and analysis,the relationship between different feed rate and processing average current,balance gap,surface rough degree are done,The results provide some theoretical basis and reference for electrochemical machining of titanium alloy.更多还原