节点文献

纸基树脂纳米银喷墨导电油墨的制备及其性能研究

Preparation and Performance Study of Paper-based Resin Nano-silver Ink-jet Conductive Ink

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈艳艳陈广学崔艳艳杨宇

【Author】 Yanyan Chen;Guangxue Chen;Yanyan Cui;Yu Yang;State Key Laboratory of Pulp and Paper Engineering,South China University of Technology;School of Materials and Energy,Guangdong University of Technology;

【机构】 华南理工大学制浆造纸工程国家重点实验室广东工业大学材料与能源学院

【摘要】 作为印制电子技术的关键材料,导电油墨的开发与创新具有实际意义。为解决纯纳米银油墨在纸基上附着力差的问题,本文配置了可用于喷墨打印的树脂纳米银导电油墨,分析并讨论导电墨层的电导率和力学性能。首先,将纳米银和光固化丙烯酸树脂按照一定比例分散在有机溶剂中,并加入少量助剂配置得到适用于喷墨打印的导电油墨。然后,通过分析纯纳米银墨层不同烧结温度下的烧结情况,讨论了烧结温度对纳米银电阻率的影响,并讨论了纳米银-树脂油墨的导电性能。最后,对比了纯纳米银油墨与树脂纳米银油墨的力学稳定性能。结果表明,纳米银固含量为20%的纳米银油墨在烧结温度为170℃,烧结时间2分钟可得到电导率为2.72×105S/m的导电墨层,而含树脂的纳米银-树脂油墨可获得电导率为3.3×104S/m的导电墨层。光固化丙烯酸对提高油墨力学稳定性有积极作用,特别是抵抗垂直方向的作用力。

【Abstract】 Development and innovation researches of conductive ink have practical significance because conductive ink is a key material for printed electronic technology.To’ solve the poor-adhesion problem of pure nano-silver ink on a paper substrate,paper-based resin nano-silver conductive ink for ink-jet printing was produced by adding acrylic resin and photo-initiator into silver nano-colloids.The electrical conductivity and mechanical properties of the conductive ink layer were analyzed and discussed.Firstly,a certain proportion of the nano-silver and photo-curable acrylic resin were dispersed in an organic solvent,and a small amount of additives were added to obtain conductive ink suitable for ink jet printing.Then,different sintering conditions of pure nano-silver ink were analyzed to discuss the effects of sintering temperature on the nano-silver resistivity,and conductive property of resin nano-silver ink was discussed.Finally,the mechanical stability of pure nano-silver ink and resin nano-silver ink was compared.The results showed that the conductive ink containing 20%of the nano-silver obtained a conductivity of 2.72 × 105 S / m when sintered at 170 ℃ for two minutes,while the conductive ink containing resin obtained a conductivity of 3.3 × 104 S / m.The addition of acrylic resin has a positive effect on improving the mechanical stability,especially in the vertical direction of the resistance force.

【关键词】 纳米银丙烯酸树脂纸基导电油墨喷墨
【Key words】 Nano-silverPaper-basedAcrylic resinConductive inkInk-jet
  • 【会议录名称】 2015第四届中国印刷与包装学术会议论文摘要集
  • 【会议名称】2015第四届中国印刷与包装学术会议
  • 【会议时间】2015-10-23
  • 【会议地点】中国浙江杭州
  • 【分类号】TQ638
  • 【主办单位】中国印刷科学技术研究院、北京印刷学院、杭州电子科技大学、中国印刷技术协会
节点文献中: 

本文链接的文献网络图示:

本文的引文网络