节点文献

塑封电子器件负极端变色原因分析

Analysis of Negative Extreme Discoloration of Plastic Electronic Devices

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 丁丽李雨辰蔺娴

【Author】 DING Li;LI Yu-chen;LIN Xian;The 46Th Research Institute,CETC;

【机构】 中国电子科技集团公司第四十六研究所

【摘要】 利用X-RAY光电子能谱仪对125°下,通电15kV,96h后负极一端出现白色物质的塑封电容器进行分析。对比分析发现,负极一端白色物质为氧化铝富集所致。造成该现象的原因是,环氧塑封料中含有活性氧化铝,由于固化不完全或吸潮导致环氧塑封料中残留水分,残留的水分与活性氧化铝结合,在电应力的作用下,有向电源负极迁移的趋势;同时,由于温度效应的存在,塑封树脂软化,加速了水分与活性氧化铝向电源负极迁移的速度,形成了氧化铝在负极端富聚现象,使电容器负极端呈现白色。

【Abstract】 X ray photoelectron spectroscopywas used to analyze the white material on plastic capacitor negative terminal,which was appeared at 125℃ 15 kV electricity for 96 h.Comparative analysis shows that,the material on negative end wasinduced by alumina enrichment.The reason for this phenomenon is active alumina which was contained in epoxy molding compound electrically migrate to the negative.Incomplete curing or moisture absorption leads to residual moisture in epoxy molding compound which combined with alumina promote the migrating.At the same time,plastic resin softening induced by temperature effectaccelerated water and active alumina migratingto the cathode of the power supply,which formed alumina poly phenomenon in the negative extreme rich.That’s the reason why the capacitor negative terminal appears white.

【关键词】 光电子能谱塑封料氧化铝迁移
【Key words】 Photoelectron spectroscopyPlastic materialAluminaMigration
  • 【会议录名称】 真空电子技术—电子陶瓷、陶瓷-金属封接专辑
  • 【会议时间】2014-11-01
  • 【分类号】TM53
节点文献中: 

本文链接的文献网络图示:

本文的引文网络