节点文献
熔体发泡法制备泡沫镁合金的缺陷分析
Analysis on the Defects of Mg-Al Alloy Foam Prepared via Melt-foaming Method
【作者】 刘小丽; 赵维民; 王志峰; 琚子来; 李娅珍; 刘振旭;
【机构】 河北工业大学材料学院;
【摘要】 以CaCO3作为发泡剂,采用熔体发泡法成功制备了泡沫Mg—Al合金。通过控制发泡剂含量、发泡温度、保温时间、搅拌速度及时间成功制备出孔结构基本均匀,孔隙率为60%~80%,平均孔径<4mm的泡沫镁铝合金样品。重点分析了泡沫镁铝合金制备过程中对孔结构稳定性和均匀性的影响因素,针对泡沫镁铝合金缺陷(局部大孔、裂纹等)出现的原因提出改进措施。
【Abstract】 By controlling the content of foaming agent,foaming temperature,holding time,stirring time, stirring speed,the Mg-Al alloy foams of uniform pore structure with porosity in the range of 60%~80% and average pore size<4mm have been made successfully via melt foaming process using CaCO3 as foaming agent.The factors influencing the stability and uniformity of pore structure in Mg-Al alloy foam prepara- tion have been analyzed.According to the cause of defects (local big hole,crack etc.) in Mg-Al alloy foam,the improving measures have been introduced.
- 【会议录名称】 2008中国铸造活动周论文集
- 【会议名称】2008中国铸造活动周
- 【会议时间】2008-10
- 【会议地点】中国江苏无锡
- 【分类号】TB383.4
- 【主办单位】中国机械工程学会