节点文献

液-固相轧制复合法生产含硅中锡/钢复合轴瓦带的凝固组织

Microstructure of Al-Sn-Si-Pb Alloy/Steel Bimetal Strip Produced by Liquid-Solid Rolling Bonding

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李兴刚谢水生许光明崔建忠

【Author】 Li Xinggang, Xie Suisheng, Xu Guangming, Cui Jianzhong( General Research Institute for Non-Ferrous Metals , Beijing 100088, China;The Key Laboratory of Electromagnetic Processing of Materials , Ministry of Education , Northeastern University, Shenyang 110004 , China)

【机构】 北京有色金属研究总院加工工程研究中心东北大学材料电磁过程研究教育部重点实验室

【摘要】 采用液-固相轧制法可以稳定、连续生产AlSn8Si2.5Pb2Cu0.8Cr0.2覆钢双层轴瓦带。通过金相照片显示其组织与铸造组织相似,但柱状晶(胞状晶)更为细小、发达,组织内Si,Sn等元素分布均匀,在液-固相轧制复合工艺条件范围内,浇注温度对胞状晶组织结构有较大影响,退火则使Sn,Si元素聚集、球化。

【Abstract】 AlSn8Si2.5 Pb2Cu0.8Cr0.2/steel bimetal strip was produced by liquid-solid rolling bonding. The mi-crostructure photo of aluminum alloy shows that fine, well-developed, compact cell crystals exist in it. In the range of the technical parameters determined byexperiments and mathematical model, the influence of casting temperature on Al alloy structure was studied. The experiment of annealing shows that it has little effect on microstructure of aluminum alloy, but promotes the agglomeration of Sn, Si, Pb.

【基金】 国家“863”计划资助项目(715-009-0060)
  • 【会议录名称】 第九届材料科学与合金加工学术会议专刊论文集
  • 【会议名称】第九届材料科学与合金加工学术会议
  • 【会议时间】2004
  • 【会议地点】中国杭州
  • 【分类号】TG335
  • 【主办单位】《稀有金属》编辑部
节点文献中: 

本文链接的文献网络图示:

本文的引文网络