【作者】 丁建宁； 张建； 凌智勇； 杨平； 范真；

【Author】 DING Jianning, ZHANG Jian, LING zhiyong, YANG ping, FAN zhen (Center of Micro/Nano Science and Technology, Jiangsu University, Zhenjiang, Jiangsu 212013.china)

【机构】 江苏大学 微纳米科学技术中心；

【摘要】 以两端固支的微梁为模型,通过在微梁与基底表面上涂覆低表面能的憎水性OTS膜以除去接触面间的表面张力, 把梁与基底均接地以除去接触面间的静电力,研究了仅有范德华力作用时的硅微梁结构的抗粘附稳定性。根据两接触面均为粗糙表面的微观实际接触模型,在接触表面产生塑性变形的情况下,计算了范德华粘附能大小。并分析了表面形貌对其影响,得到了粗糙表面接触的微梁的抗粘附临界长度。更多还原

【Abstract】 The adhesion of silicon microbeam is studied under van der waals forces when other surface forces are eliminated by some techniques. The surfaces of the beam and the substrate are coated with low-surface-energy hydrophobic OTS molecular films to remove capillary forces. The cantilever and the substrate are electrically grounded to eliminate electrostatic force between them, considering the actual contact model of two rough surfaces and their influence on the adhesion, as well as the plastic deformation in the contact, the adhesion energy of the model under van der waals forces is calculated. Additionally, the effects of surface roughness on the adhesion energy of van der waals forces are analyzed. At last, the pull-in length of the cantilever of rough surface is calculated.更多还原