【作者】 汤卉； 邵俊鹏； 高维丽；

【Author】 TANG Hui SHAO Jun-peng GAO Wei-li (Department of Material Science and Engineering,Harbin University of Science and Technology,HarBin 150040,China)

【机构】 哈尔滨理工大学材料科学与工程学院；

【摘要】 为解决石油热采密封技术中密封材料润滑、高温氧化与遇热膨胀问题,从复合材料结构角度讨论了 Ag/ 石墨基复合材料在石油热采密封技术中应用的可行性．研究了真空高压浸渍法制备工艺条件对 Ag/石墨密封环性能的影响,采用 XPS、SEM 等研究方法对 Ag/石墨密封环进行能谱和显微结构观察与研究,研究结果表明 Ag/ 石墨密封环表层主要由 Ag、C 元素构成,并混有少量的 O、S,Ag 含量少,内部为 C 且石墨片层三维有序．为验证 Ag/石墨密封环密封效果,对系统进行空载、冷试、热试3项试验．结论：Ag/石墨密封环在压力25MPa、温度350℃工况下运行,系统无泄漏、咬合发生．更多还原

【Abstract】 In order to solve the problems of lubrication,oxidation and expatiation of seal unit using in heat extraction of oil at high temperature,Ag/graphite composites seal rings are used.The seal rings were prepared by high pressure-infiltration method.The influence of this method upon the performance of seal ring was discussed by using Gribbs’theory.The energy spectrum and rnicrostructurc of Ag/graphitc composites were studied and observed by SEM, indicating that the surface elements are composed of Ag,C,O and S.There are only C elements under the surface of the ring and the structure is parallel slices.The no-loading test,cold test and high temperature test were made to certify the effect of seal rings.The result is that there was nearly no leaking in the system under 25MPa at 350℃.更多还原