【作者】 曲敬龙； 杜金辉； 毕中南； 王民庆； 张继； 吴贵林；

【Author】 QU Jing-long1,DU Jin-hui1,BI Zhong-nan1,WANG Min-qing1,ZHANG Ji1,WU Gui-Lin2(1.High Temperature Material Research Institute,Central Iron and Steel Research Institute,Beijing 100081,China;2.Fushun Special Steel Co.Ltd,Fushun 113000,Liaoning,China)

【机构】 钢铁研究总院高温材料研究所； 抚顺特殊钢股份有限公司；

【摘要】 利用MTS热模拟压缩试验,测试了铸态GH4720Li合金经均匀化后在不同温度、应变速率、应变条件下的热变形行为。通过计算变形表观激活能和变形后的组织及外观观察,研究了合金的流变应力行为、再结晶规律以及热塑性特征。结果表明,合金在1130~1160℃变形时可以得到细小的再结晶组织,同时具有较好的热加工塑性。较低和较高的温度下变形都有可能造成开裂,同时晶粒组织无法得到控制。更多还原

【Abstract】 To study the hot deformation behavior of homogenization treated GH4720Li ingot at different temperatures,strain rates and strains,hot-compression simulation tests were carried out using MTS.Activation energy calculation,appearance and microstructure observation were also promoted to investigate the flow stress behavior,recrystallization law and thermo-plasticity respectively.The results show that 1130 ℃ ～1160℃ is the most suitable forging temperature range,in which fine grains and accepted thermo-plasticity could be gained.Fracture and unpleasant microstructure may occur after forging at either below or above this temperature range.更多还原