节点文献

升温速度对微波烧结W-Ni-Fe高密度合金的影响

Heating Rate Effect in Microwave Sintered W-Ni-Fe Heavy Alloys

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 周承商易健宏罗述东郭颖利彭元东

【Author】 ZHOU Chengshang,YI Jianhong,LUO Shudong,GUO Yingli,PENG Yuandong (State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083)

【机构】 中南大学粉末冶金国家重点实验室

【摘要】 研究了微波烧结升温速度在10~112℃/min范围对90W-7Ni-3Fe高密度合金的影响。结果表明,当升温速度在20~105℃/min范围内时,均能获得相对密度约99%、拉伸强度850~930MPa、延伸率约20%优异性能的合金。通过分析显微组织结构发现,高升温速度获得的样品W晶粒更小,接触度较大。同时,在80℃/min的升温速度条件下,样品的力学性能、晶粒尺寸和接触度参数最佳。

【Abstract】 In this paper,heating rate effect in microwave sintered 90W-7Ni-3Fe heavy alloys is investigated in a rate range of 10~112℃/min.When sintered at rates 20~05℃/min,alloys with excellent properties are achieved:over 99%relative density,850~930MPa tensile strength and around 20%elongatioa Within the experimental scope, faster heating rate results in smaller W grain size and larger W-W contiguity.The best combination of microstructure parameters and mechanical performance is present at the rate of 80℃/min.

  • 【会议录名称】 “第十四届全国微波能应用学术会议”暨“2009年微波创造美的生活高峰论坛”论文集
  • 【会议名称】“第十四届全国微波能应用学术会议”暨“2009年微波创造美的生活高峰论坛”
  • 【会议时间】2009-11-18
  • 【会议地点】中国广东佛山
  • 【分类号】TF124.5
  • 【主办单位】中国电子学会微波分会
节点文献中: 

本文链接的文献网络图示:

本文的引文网络