节点文献
基于FPGA的非标准PAL数字信号VGA转换器的设计
The Design of Non-Standard PAL Digital Signal VGA Converter Based on FPGA
【作者】 段晓晨;
【导师】 何小刚;
【作者基本信息】 太原理工大学 , 控制理论与控制工程, 2006, 硕士
【摘要】 目前,兼容PAL信号数字电视广泛采用PAL→VGA转换器来显示图像,在一些特殊情况下,由非标准PAL的CCD捕获得图像是不能够用上述转换器进行图像显示的。本课题基于SHARP公司的非标准PAL CCD RJ2461捕捉的752×585@50Hz活动图像,进行VGA显示转换,使得显示器点对点地显示CCD上每一个像素,这种技术在指纹识别,高要求监控系统中有广泛的应用;文中采用了XILINX的Spartan Ⅱ系列XC2S300E芯片实现了非标准PAL→VGA转换器的设计,为今后设计大规模的集成电路提供可直接利用的IP核。 本文针对以下三个方面进行研究并取得一定的成果: (一) 单SDRAM控制器的设计实现 首先对于这种实时的单位带宽内数据量大的特点选择了SDRAM,在对SDRAM特性的熟悉之后,设计了基于FPGA的单SDRAM控制器,在仿真正确后,下载到自己设计的硬件电路上进行调试,通过不断修正参数,改变延时等方法最终实现了单SDRAM控制器的设计;这样为下面双SDRAM控制器的设计做一个坚实的基础,同时也总结一些关键的调试经验,试验证明这是比较合理的设计思路,节约了设计时间。
【Abstract】 Currently, digital television signal compatible pal widely used PAL→VGA converters to show images like that in some exceptional circumstances, non-standard pal from the CCD to capture images is not enough for these converters images show. SHARP companies based on the topic of non-standard PAL CCD RJ2461 capture images of 752 x 585@50Hz activities, VGA conversion, allowing display of data to show that each CCD pixels, this technology in fingerprint identification, demanding extensive monitoring system applications; The text adopted Xilinx Spartan II series XC2S300E achieve non-standard chip design PAL→ VGA converters, for from now on will design the big scale the integrated circuit provides may the direct use IP nucleus.With the following three aspects of this study and obtain some results: (a) Single memory controller design achievementFor the first such real-time images of the large volume of data memory characteristics chosen in memory of the familiar characteristics, a
- 【网络出版投稿人】 太原理工大学 【网络出版年期】2006年 12期
- 【分类号】TN941
- 【被引频次】1
- 【下载频次】658