【作者】 丁卫平；

【导师】 邓伟；

【作者基本信息】 苏州大学 ， 软件工程， 2005， 硕士

【摘要】 本文首先分析了目前办公自动化系统实际应用中所面临和迫切需要解决的三个问题: 痕迹保留、授权处理和数字签名, 然后在对这三个问题进行深入分析的基础上提出了解决这些问题的方法以及基于Lotus Notes 的实现技术: 基于DCOM 和VBA技术的痕迹保留、基于实体的动态授权机制以及基于二次剩余的数字签名和加密算法。在上述关键技术研究的基础上, 构建南通大学办公自动化实验系统, 在其中的文书处理模块对痕迹保留、授权处理、数字签名三项关键技术所提出的方法及实现技术做了实际的应用, 从而验证了这些方法和技术的有效性。最后, 本文进行总结, 提出仍需深入研究的一些课题以及展望办公自动化系统的未来发展。本文所做的工作为办公自动化系统的研究和开发提供了一定的理论和技术, 对于设计出能更好的满足日常实际工作的办公自动化系统具有一定的借鉴意义。更多还原

【Abstract】 This thesis begins with the analysis of the three questions faced and needed to be solved in the course of the present office automation system practical application: vestige reservation; authorized management; digital signature. Then on the foundations of deep analysis of the three questions, the author comes up with the suggested answer to the questions and the realization of technologies based on Lotus Notes through vestige reservation of DCOM and VBA, dynamic authorized mechanism based on entity along with digital signature and encrypted algorithm based on the quadratic residue. After careful study on the above key technologies, the author constitutes the experimental model of the Nantong University Office Automation and applies the methods expounded and the realization technologies in the documentary modules, thereby proves the effectiveness of these methods and technologies. Finally, this thesis gives a summary, presenting some questions to need further study in this field and looking into the future development of the office automation system. The work of this thesis provides the theory and technology for the research and development of the office automation system, which will be helpful and useful for the daily works of practical application of office automation.更多还原