某型火炮显示控制系统设计

【作者】 朱建良；

【导师】 薄煜明；

【作者基本信息】 南京理工大学 ， 控制理论与控制工程， 2005， 硕士

【摘要】 本文研究的内容是利用μC/OS-Ⅱ嵌入式实时操作系统和ARM单片机实现实时数据传输,并为炮手提供操作平台。 本文首先介绍了现代防空火炮和DSP随动控制系统对显控系统的需求。分析了显控系统在现代防空火炮中的应用前景。然后,针对某型防空火炮的功能要求,分析了显控系统的硬件设计方案。然后针对具体的硬件模块,分析各个硬件驱动程序的设计方法。最后,结合μC/OS-Ⅱ嵌入式实时操作系统,分析了显控系统应用层的软件设计方案。 在实际开发阶段,根据项目要求,主要完成了以下工作: 1.显控系统的硬件设计; 2.显控系统各个模块驱动程序的设计与编写; 3.显控系统软件功能的设计; 4.显控系统与DSP随动控制系统以及电机连接,进行联合调试。更多还原

【Abstract】 The contents of this paper is to realize the data transmission and provide the operation interphase for artillerists , based on μC / OS-Ⅱ operation system and ARM single-chip microcomputer.At the beginning of the thesis , the need of modern aerial defence artillery system and DSP control system to the display and control system is discussed . Secondly ,the hardware design of the display and control system is totally analyzed , and the drive software of each concrete hardware part is compiled . At last, with the μC/OS -Ⅱ operation system , the frame of the application software is well designed .According to the requirement of this project, the following parts are included :1) The hardware design of the display and control system ;2) The drive software design of each concrete hardware part;3) The frame of the application software design ;4) The connection and test with DSP control system and electrical equipment.更多还原