高层建筑施工过程仿真分析与CAD二次开发及应用

【作者】 蒲红克；

【导师】 杨菊生；

【作者基本信息】 西安理工大学 ， 结构工程， 2001， 硕士

【摘要】 本文主要研究在施工因素影响下建筑物的结构计算，并把其计算结果与传统的一次加载计算结果进行比较，得出有益结论。本文主要研究：施工过程建筑风载计算；各种工况下结构受力分析与CAD技术开发应用：施工过程对含转换层结构计算的影响等。 编制高层建筑施工过程中各层的风载程序，使设计人员明确了解高层建筑施工过程中的受力情况；计算施工过程各层的结构内力与位移，并用图形表达结构受力及计算结果。图形采用对 AutoCAD二次开发的工具形成；对各种工况 （不同弹模模型）下的最终结果作以比较（包括内力及变形图),以获得对高层建筑结构受力分析较为安全、更切合实际的计算方法：对含转换层结构的高层 建筑结构受力计算考虑施工过程的影响，把其结果与传统计算方法结果进行对 比，得出有益结论。 本文研究方法及结论对结构计算及后处理人员、CAD开发人员、仿真研究 人员有很大的参考价值。更多还原

【Abstract】 This paper mainly studys the structure calculation of high building about theaffection of contructing process, and makes compare with the traditional adding loadmethod to draW some useful conclusions. The main content of this paper as follows:wind load of building calculation under constructing process; the analysis of loadingstructure and CAD technique exploitation and application under different instance; theaffection of constructing process on the calculation of structure with conversionlayers.Make wind load program which helps the deviser knows about the load situationof high building under conndng Process; calculate structure interal force anddisplacement of every floor and express them with figure. The figure is made by thetool developped with AutoCAD; the outcome contrast of different instance brings usmore safe and high suitable to practice calculating method about high buildingstructure analysis; using new method of this paper to calculate the high buildingstructure with conversion layers gets useful result compared with the traditionalmethod.The study methods and conclusion have great refereniial value for structurecalculator and back processof, CAD developer and study emulation people.更多还原