节点文献

螺纹钢中MnS夹杂物诱发的局部腐蚀行为

Localized Corrosion Behavior Induced by MnS Inclusions in HRB400E Rebar Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 韩宇龙李健郭丽雅杨边疆陆恒昌韦习成董瀚

【Author】 HAN Yulong;LI Jian;GUO Liya;YANG Bianjiang;LU Hengchang;WEI Xicheng;DONG Han;School of Materials Science and Engineering,Shanghai University;Zhejiang Institute of Advanced Materials,Shanghai University;Shaanxi Steel Group lndustrial Innovation Research Institute Co.,Ltd.;

【通讯作者】 郭丽雅;

【机构】 上海大学材料科学与工程学院上海大学(浙江)高端装备基础件材料研究院陕钢集团产业创新研究院有限公司

【摘要】 采用全自动夹杂物分析仪、浸泡实验和电子背散射衍射仪(EBSD)等手段研究了HRB400E螺纹钢中不同尺寸MnS夹杂物在Cl~-环境中诱发局部腐蚀行为。原位浸泡结果表明:MnS夹杂物尺寸越大,越容易诱发局部腐蚀行为。EBSD结果表明:尺寸大于40μm~2的夹杂物容易引发腐蚀,和周围有较多的小角度晶界和较高的位错密度有关。同时,团簇大尺寸夹杂物共同诱发局部腐蚀形成的蚀坑面积大于单一夹杂物诱发的蚀坑。

【Abstract】 The effect of MnS inclusions with different sizes on the corrosion behavior of HRB400E rebar steel in 2%NaCl solution was investigated by means of automatic inclusion analyzer, immersion tests and Electron Backscattered Diffraction. The in-situ immersion test results showed that the localized corrosion was more easily induced by the relatively larger MnS inclusions than the smaller ones. The EBSD results suggested that corrosion was more likely initiated by inclusions with size above 40 μm2, and this may be related to the presence of more low-angle grain boundaries and higher dislocation densities around them. Meanwhile, compared with the pit induced by a single inclusion, the width of pits initiated by clusters of large-size inclusions were greater.

【关键词】 MnS尺寸螺纹钢局部腐蚀
【Key words】 MnSsizerebarslocalized corrosion
【基金】 国家自然科学基金(42276214和52201078);上海市青年科技英才扬帆计划(21YF1412800)~~
  • 【文献出处】 中国腐蚀与防护学报 ,Journal of Chinese Society for Corrosion and Protection , 编辑部邮箱 ,2024年05期
  • 【分类号】TG172
  • 【下载频次】67
节点文献中: 

本文链接的文献网络图示:

本文的引文网络