【摘要】 铜合金具有良好的导电性和导热性，是应用最广泛的工业材料之一。铜合金服役过程中常与酸、碱、盐等腐蚀介质接触，易引起铜合金的腐蚀，最终导致失效，对生产制造带来危害。提高铜合金的耐腐蚀性有利于进一步扩展其应用领域。本文主要归纳了Cr, Pb, Ti, Al,Mn, Ni以及稀土元素的添加对合金耐蚀性能的影响，通过合金元素的添加可以改变铜合金表面腐蚀产物膜的组成和形貌，减小相与相之间腐蚀电位差，以及减少有害杂质的存在，以此来改善铜合金的耐蚀性能。塑性变形和热处理是改善铜合金力学性能的常用手段，经塑性变形和热处理过后的铜合金，其微观组织形貌和分布发生了变化，因此对合金耐蚀性能也有一定的影响。本文主要从合金化、塑性变形及热处理3个方面对铜合金耐蚀性能影响进行综述，最后对铜合金的腐蚀防护研究进行总结和展望。更多还原

【Abstract】 Copper alloy has good electrical and thermal conductivity, is one of the most widely used industrial materials. Copper alloy is often contact with acid, alkali, salt and other corrosive media in the service process, easy to cause corrosion of copper alloys, ultimately lead to failure and bring harm to manufacturing. Improving the corrosion resistance of copper alloys is conducive to the further expansion of its application areas. This paper mainly summarizes the effects of Cr, Pb, Ti, Al, Mn, Ni and its rare earth elements on the alloy’s corrosion resistance, the addition of alloying elements can change the composition and morphology of the surface corrosion product film of copper alloys, reduce the corrosion potential difference between phase and phase, and reduce the existence of harmful impurities, so as to improve the corrosion resistance of copper alloys. Plastic deformation and heat treatment are the common means to improve the mechanical properties of copper alloys, after plastic deformation and heat treatment, the microstructure morphology and distribution of the copper alloys have been changed, so it also has a certain influence on the alloy corrosion resistance. In this paper, the impacts of alloying, plastic deformation and heat treatment on the corrosion resistance of copper alloys were mainly reviewed from the three aspects, and finally the research on corrosion protection of copper alloys was summarized and prospected.更多还原