节点文献
Cu-ZnIn2S4/Ti3C2高效光催化还原水中Cr(Ⅵ)
Efficient photocatalytic reduction of Cr(Ⅵ) from water by Cu-ZnIn2S4/Ti3C2
【摘要】 采用水热反应在超薄纳米片Ti3C2上原位生长Cu-Zn In2S4复合微球,合成出Cu-Zn In2S4/Ti3C2复合材料,并将其用于可见光下光催化还原水中Cr(Ⅵ)(50 mg/L)。表征结果显示:复合材料中的Cu主要以单质铜的形式存在,但含量较低;复合材料对可见光的吸收性能较Zn In2S4显著提升。实验结果表明:得益于Cu的掺杂提高了载流子密度和电荷传输效率以及其直接还原Cr(Ⅵ)的性能,光照60 min后Cu-Zn In2S4对Cr(Ⅵ)的去除率可达69.5%,高于Zn In2S4的44.3%;引入Ti3C2后,复合材料的强界面作用有效延长了光生载流子的寿命,使得光照60min后Cu-Zn In2S4/Ti3C2对Cr(Ⅵ)的去除率可达100%;Cu-Zn In2S4/Ti3C2具有良好的循环稳定性。
【Abstract】 Cu Zn In2S4 composite microsphere was in-situ grown on ultra-thin nanosheet Ti3C2 by hydrothermal reaction to synthesize Cu Zn In2S4/Ti3C2 composite,and the composite was used for photocatalytic reduction of Cr(Ⅵ)(50 mg/L)from water under visible light.The characterization results show that:Cu in the composite mainly exists in the form of elemental copper,but its content is low;The visible light absorption performance of the composite is significantly improved compared with that of Zn In2S4.The experimental results show that:Profiting from the increase of carrier density,charge transfer efficiency and direct reduction performance of Cr(Ⅵ)by Cu doping,the removal rate of Cr(Ⅵ)by Cu-Zn In2S4 is up to 69.5%after 60 min irradiation,which is higher than 44.3%of Zn In2S4;After the introduction of Ti3C2,the strong interface effect of the composite effectively extends the lifetime of photo generated charge carriers,resulting in a 100%of Cr(Ⅵ)removal rate by Cu-Zn In2S4/Ti3C2 after 60 min of illumination;And Cu-Zn In2S4/Ti3C2 has good cyclic stability.
【Key words】 Cr(Ⅵ); photocatalytic reduction; ZnIn2S4; Ti3C2; nano-copper loading;
- 【文献出处】 化工环保 ,Environmental Protection of Chemical Industry , 编辑部邮箱 ,2023年04期
- 【分类号】X703;O643.36;O644.1
- 【下载频次】107