节点文献

粘胶织物中烟酰胺的释放曲线及其模型拟合

Release curve of nicotinamide from viscose fabrics and its model fitting

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 朱维维龙家杰施楣梧

【Author】 ZHU Weiwei;LONG Jiajie;SHI Meiwu;College of Textile and Clothing Engineering, Soochow University;Scientific Research Base for Waterless Coloration with Supercritical Fluid (China Textile Engineering Society);Beijing Haidian No. 57 Retired Cadres Rest House;

【通讯作者】 施楣梧;

【机构】 苏州大学纺织与服装工程学院超临界流体无水绳状匹染技术科研基地(中国纺织工程学会)北京海淀第57离职干部休养所

【摘要】 为将新兴的绿色、高效的超临界CO2流体整理技术用于生物活性纺织品开发,提高服用类织物附加值,以生物活性药物烟酰胺为模型药物,粘胶织物为基材,利用超临界CO2流体分别在不同温度、压力条件下制备负载有烟酰胺的生物活性粘胶织物,将其置于释放介质中,考察烟酰胺从粘胶织物中释放行为的影响因素。结果表明:烟酰胺从粘胶织物中的绝对释放量及绝对释放速率与其在粘胶织物上的负载量正相关;低流体温度(60℃)以及高流体压力(20 MPa)下制备的生物活性粘胶织物累积释放百分比及累积释放速率更低,释放平衡时分别接近87.6%、87.3%;烟酰胺从粘胶织物中的释放行为符合Korsmeyer-Peppas模型,其扩散以菲克扩散为主。

【Abstract】 Objective Supercritical carbon dioxide fluid(SCF-CO2) is a new green processing and high-efficiency finishing technology, nontoxic, nonflammable and can be recycled, which have been used to impregnate the drug into polymer matrix in biomedical field widely and is superior to the traditional finishing technology. In order to fabricate bioactive textile with good bioactive drug release property through SCF-CO2 impregnation processfor increasing the added value of clothing fabrics, it is necessary to analysis the variation and influence factors of release property of drug from bioactive textile fabricated by SCF-CO2. Method The bioactive drug nicotinamide with skin whitening, nourishing was used as the model drug, and viscose fabric was used as the substrate. Nicotinamide-loaded bioactive viscose fabrics processed by SCF-CO2 under different temperatures(60, 70 and 80 ℃) and different pressures(12, 16 and 20 MPa), which were placed in the same release medium and measured the drug release amount in specific time by ultraviolet spectrophotometer. Ethanol was regarded as the release medium. Finally, the release curves that the drug release amount varied with time were drawn. The drug loading capacity was also measured. Besides, the release curves were fitted by different release models. Results A higher absolute release quantity and a higher absolute release rate are obtained respectively when the supercritical CO2(SCCO2)temperature is 80 ℃, compared to 60, 70 ℃ of SCCO2 temperature. Besides, the drug loading capacity increases with increasing SCCO2 temperature and the values are 6.165 4, 6.617 2 and 8.936 7 mg/g per weight of raw viscose fabric respectively. A higher absolute release quantity and a higher absolute release rate are also obtained respectively when the pressures are above 16 MPa as illustrated, compared to 12 MPa of SCCO2 pressure. The drug loading capacity also increases with increasing pressure and the values are 0.838 7, 4.955 3 and 6.617 2 mg/g per weight of raw viscose fabric respectively. A lower cumulative release percentage and a lower cumulative release rate are obtained respectively when the SCCO2 temperature is 60 ℃, which have an increasing tendency with increasing SCCO2 temperature, and the cumulative release percentage can be as low as 87.6% when it reaches the releasing equilibrium. On the contrary, a lower cumulative release percentage and a lower cumulative release rate are obtained respectively when the SCCO2 pressure is 20 MPa, which have a decreasing tendency with increasing SCCO2 pressure, and the cumulative release percentage can be as low as 87.3% when it reaches the releasing equilibrium. The R2 of Korsmeyer-Peppas model for all the release curves of nicotinamide-loaded viscose fabric processed by different SCCO2 temperature, pressure is much higher than Zero-order release model, Higuchi model, and the R2 is above 0.935 39 as depicted in Tab.1 and 2. Moreover, the corresponding diffusion index is generally below 0.45 except that the one processed under 60 ℃ of SCCO2 temperature. Conclusion The absolute release quantity and release rate of nicotinamide from viscose fabric are positively related to its loading capacity on the viscose fabric that vary with different SCCO2 temperature and pressure. A higher loading capacity results in a higher absolute release quantity and a higher release rate. A lower cumulative release percentage and a lower cumulative release rate can be obtained when nicotinamide-loaded bioactive viscose fabric is processed by a lower SCCO2 temperature or a higher SCCO2 pressure. It means the cumulative release property is correlated to the density of SCCO2. The release kinetics of nicotinamide-loaded viscose fabric processed by SCCO2 are more consistent with Korsmeyer-Peppas model. Moreover, the diffusion behavior of nicotinamide from viscose fabric is mainly belong to Fick diffusion.

  • 【文献出处】 纺织学报 ,Journal of Textile Research , 编辑部邮箱 ,2023年03期
  • 【分类号】TS195.5
  • 【下载频次】32
节点文献中: 

本文链接的文献网络图示:

本文的引文网络