【摘要】 应变式三轴力传感器可用作车床切削力的测量，但其应变原理使传感器被施加压力后会产生相应的形变量，会影响到机床的加工精度。本文对LH-SZ-05三轴力传感器进行ANSYS分析及载荷试验，从试验和有限元分析方面验证应变式三轴力传感器对机床切削力测量的可行性，为应变式三轴力传感器的进一步制作和应用奠定了基础，为数控机床高速切削状态下切削力测试奠定基础。更多还原

【Abstract】 The strain type triaxial force sensor can be used for measuring the cutting force of a lathe, but its strain principle causes the sensor to generate corresponding deformation variables after being applied pressure, which can affect the machining accuracy of the machine tool. ANSYS analysis and load tests were conducted on the LH-SZ-05 triaxial force sensor to verify the feasibility of the strain type triaxial force sensor for measuring the cutting force of the machine tool from the perspectives of experiments and finite element analysis, Laying the foundation for the further production and application of strain type triaxial force sensors.更多还原