节点文献

铸造用酚脲烷自硬树脂的高温力学性能研究

High Temperature Mechanical Properties Investigation on Casting-used Self-hardening Phenol Urea Methane Resin

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 彭昕肖惠康殷亚军万鹏李远才周建新

【Author】 PENG Xin;XIAO Hui-kang;YIN Ya-jun;WAN Peng;LI Yuan-cai;ZHOU Jian-xin;State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science and Technology;

【通讯作者】 殷亚军;

【机构】 华中科技大学材料成型与模具技术国家重点试验室

【摘要】 以酚脲烷树脂为主要研究对象,通过DMA检测不同温度下的酚脲烷树脂试样,绘制并分析了酚脲烷树脂0~400℃的DMA曲线,发现了酚脲烷树脂的玻璃态转变温度和良好阻尼性能的温度范围。通过对各温度点下数据的处理,分析了从室温至900℃树脂残留抗压强度的变化趋势及其变化原因。试验结果表明:酚脲烷树脂从300℃开始分解反应,导致强度急剧下降;在600℃左右,树脂焦化,强度变化很小;在600℃以上,树脂样品中碳的结构发生改变,强度小幅上升。

【Abstract】 Phenolic urethane resin was taken as the main study object,through detecting phenol urethane resin samples at different temperatures by DMA,the DMA curves of 0~400 ℃ of phenol urethane resin were plotted and analyzed,a temperature range of glass transition temperature and good damping properties of phenol urea resin were found. By processing the data at each temperature points,the changing trend of the residual compressive strength of the resin from room temperature to 900 ℃and changing reason were analyzed. The test results indicated:at about 600 ℃,resin coking,with little variation in strength,at temperature higher than 600 ℃,the structure of the carbon in the resin samples changed,its strength rose slightly.

【基金】 国家自然科学基金联合基金项目(U1808216);国防科技重点实验室基金项目(6142A02190303);中央引导地方科技发展专项(2020);中国有色集团科技计划项目(2018KJJH05)
  • 【分类号】TG22
  • 【被引频次】1
  • 【下载频次】70
节点文献中: 

本文链接的文献网络图示:

本文的引文网络