【摘要】 为研究SBS改性沥青混合料在饱水过程中的力学强度演化过程，提出了一种基于圆孔孔边应力集中效应的力学模型，分别计算了非饱水和饱水孔隙的孔边应力.对不同沥青含量的SBS改性沥青混合料试件进行水敏感性试验（MIST）和恒温浸水试验，采用间接拉伸强度（ITS）和拉伸强度比（TSR）来表征沥青混合料的强度演化过程，分析孔隙水压循环次数、水浴时间、孔隙水压力和温度对沥青混合料强度的影响.结果表明：在劈裂荷载作用下，孔隙水压抗力消散了薄弱孔隙的应力集中；随着孔隙水压循环次数或恒温水浴时间的增加，试件的ITS先减小后增大，TSR持续增大；沥青混合料在饱水过程中的强度增加，实际上采集到的是沥青混合料自身强度与孔隙水压力的加和；温度对沥青混合料强度的影响比孔隙水压力的影响更加显著.更多还原

【Abstract】 In order to study early strength evolution of saturated SBS modified asphalt mixture,a mechanical model based on effect of stress concentration at circular hole was proposed,and the pore-edge stress of non-saturated and saturated pore was calculated respectively. Moisture induced susceptibility test and immersion test were carried out for asphalt mixture with different asphalt contents. Then indirect tension test was utilized to obtain the indirect tensile strength and tensile strength ratio. The results show that under the splitting load,the pore water pressure dissipates the stress concentration phenomenon of the weak pore. With the increase of the moisture induced susceptibility test cycle times and the bath time,the indirect tensile strength first decreases and then increases,and the tensile strength ratio continues to increase. The strength of the asphalt mixture in the process of moisture conditioning increases,because the sum of asphalt mixture strength and pore water pressure is collected together in fact. The influence of temperature on the strength of asphalt mixture is more significant than that of pore water pressure.更多还原